현상
CM Cluster를 등록한 후, 마스터 노드와 통신이 불가하여 클러스터 시작이 실패하는 현상입니다.
CM2 로그에서 "No route to host" 오류가 발생하며, 마스터 노드에 접근할 수 없다는 메시지가 나타납니다.
(master node 외 노드) cm에 cluster 추가 후 마스터 노드와 통신 불가하여 start failed 되는 현상
•
cm2 log 확인시 [ERROR] connect error: No route to host 발생, cm1(Master node) 접속 불가한 로그 확인
(cm tip 파일의 CM_LOG_DEST 파라미터의 경로에서 trace_cm.log 파일에서 확인 가능)
2025/04/11 11:16:44.005 [1] cm_actio:8961(04) [cls] Cluster `cls` init start
2025/04/11 11:16:44.024 [1] cm_file.:1681(04) [cls] Try to check cluster activity...
2025/04/11 11:16:44.024 [3] cm_netwo:0252(04) [cls] socket fd:16 is set with the priority 2 (conn)
2025/04/11 11:16:44.025 [1] cm_netwo:0300(04) [cls] [ERROR] connect error: No route to host
2025/04/11 11:16:44.025 [1] cm_netwo:0829(04) [cls] [ERROR] Connect to 'cm1(192.168.xx.xx:portno)' failed. No route to host
2025/04/11 11:16:44.025 [1] cm_file.:1302(04) [cls] Cannot connect to master node...
2025/04/11 11:16:44.025 [1] cm_file.:1327(04) [cls] Check CM file heartbeat area...
2025/04/11 11:16:46.054 [1] cm_file.:1681(04) [cls] Try to check cluster activity...
2025/04/11 11:16:46.054 [3] cm_netwo:0252(04) [cls] socket fd:16 is set with the priority 2 (conn)
2025/04/11 11:16:46.056 [1] cm_netwo:0300(04) [cls] [ERROR] connect error: No route to host
2025/04/11 11:16:46.056 [1] cm_netwo:0829(04) [cls] [ERROR] Connect to 'cm1(192.168.xx.xx:portno)' failed. No route to host
2025/04/11 11:16:46.056 [1] cm_file.:1302(04) [cls] Cannot connect to master node...
2025/04/11 11:16:46.056 [1] cm_file.:1327(04) [cls] Check CM file heartbeat area...
2025/04/11 11:16:47.063 [1] cm_file.:1510(04) [cls] [ERROR] check interconnect network interface
2025/04/11 11:16:47.063 [1] cm_actio:9186(04) [cls] [ERROR] Failed to init CM files
2025/04/11 11:16:47.063 [1] cm_actio:7682(04) [cls] all cluster resource down
2025/04/11 11:16:47.063 [1] cm_actio:9475(04) [cls] Cluster 'cls' down
Plain Text
복사
원인
master node 와 인터커넥트 네트워크 통신 불가로 인해 start fail이 발생합니다.
해결
•
master node server 방화벽 및 접근 제어 솔루션을 확인합니다.
•
두 노드 간 인터커넥트 네트워크 통신 원할 여부를 확인합니다.
참고
ping이 정상적으로 전송되어도 해당 현상이 발생할 수 있으므로, telnet으로 포트까지 확인이 필요합니다.